1. If ARP=reply-only is configured on an interface, this interface will
Jawab :
Accept IP and MAC address combinations listed in ‘/ip arp’ list
2. For static routing functionality, additionally to the RouterOS ‘system’ package, you will also need the following software package:
Jawab :
No extra package required
3. Which features are removed when advanced-tools package is uninstalled?
Jawab :
- Netwatch
- Ping
- Ip-scan
4. Select minimal set of software packages in RouterOS required to configuring a wireless AP
Jawab :
- System
- Wireless
5. A RouterBOARD clock is configured in ‘/system clock’. The clock resets to default after each reboot. Select the best solution for the problem.
Jawab :
Configure ‘/system ntp client’ and set a valid and reachable NTP server address
6. Choose the correct PCQ argument values to allow 256kbps maximun download and upload for each client:
Jawab :
- Kind=pcq pcq-rate=256000 pcq-classifier=dst-address
- Kind=pcq pcq-rate=256000 pcq-classifier=src-address
7. In the Route List, the identification Dab for a route stands for
Jawab :
Dynamic – active – bgp
8. What kind or users are listed in the /user menu?
Jawab :
Router users
9. What is the correct action for a NAT rule on a router that should intercept SMTP traffic and send it over to a specified mail server?
Jawab :
Dst-nat
10. How long is level 1 (free) license valid?
Jawab :
Infinite time
11. What is necessary for PPPoE client configuration?
Jawab :
Interface (on which PPPoE client is going to work)
12. PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host, it will not be able to create PPPoE tunnel to that PPPoE server.
Jawab :
True
13. Action of type ‘masquerade’ in ‘IP > Firewall > NAT ‘ is a ‘special case’ of the following action:
Jawab :
Src-nat
14. Which facility should be used, to ensure that clients with radio signal strength poorer than -90 dBm can not connect to interface wlan1 on a MikroTik AP? Choose one answer:
Jawab :
Access list
15. When viewing the routes in Winbox, some routes will show “DAC” in the frist column. These flags mean:
Jawab :
Dynamic, Active, Connected
16. What does this simple queue do (check the image)?
Jawab :
Queue limits host 192.168.1.10 upload data rate to one megabit per second.
17. Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?
Jawab :
Default Authenticate
18. Which port does PPTP use by default?
Jawab :
TCP 1723
19. Assumsing DHCP relay is not being used, how many DHCP server can be configured per interface on RouterOS?
Jawab :
1
20. When sending out an ARP request, an IP host is expecting what kind of address for an answer?
Jawab :
MAC Address
21. A client that has successfully connected to a wireless network is considered to be which of the following? Choose all that apply:
Jawab :
- Associated
- Authenticated
22. What is the meaning of the status letter ‘R’ on a PPPoE client interface in RouterOS interfaces menu?
Jawab :
Running
23. It is required to make a web server residing on a private subnet in a LAN visible on the public internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met (select all that apply):
Jawab :
- In IP firewall NAT there should be a dst-nat rule between the public IP address of the router and the private IP of the web server
- Connection tracking must be enable on the router
24. Action=redirect is applied in
Jawab :
Chain=dstnat
25. Simple Queue number 0 defines 2M for upload and download fot target IP 10.10.0.33. Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33.
The maximum bandwidth that the client 10.10.0.33 is be able to obtain is:
Jawab :
2M upload/download
Tidak ada komentar:
Posting Komentar